 |
Fuel injection terminal, for insertion into Bosch fuel injection
connectors used on many German cars. Best with wire size 18-24
gauge. |
$0.20 each |
|
 |
Fuel injection connector, 2 pin, female, for Bosch
fuel injection wiring. (19 pcs available) |
$1.85 |
|
 |
2 pin boot for Bosch fuel injection connector (7 pcs available) |
$2.60 each |
|
 |
3 pin boot for Bosch fuel injection connector (13 pcs
in stock) |
$2.10 each |
|
 |
20 gauge wire,
sold by the foot in the
following colors: black, brown, red, orange, yellow, green, blue, purple, gray, white, pink, tan It's 20 gauge, SAE J1128, stranded, non-tinned copper, general purpose
automotive primary wire, -40 F to 176 degrees F. Great for automotive
wiring and restoration. |
$0.07/foot |
|
 |
5/16" black vinyl tubing, used as wiring sheath for
an OE appearance in your engine bay. |
$0.25/foot |
|
 |
.250" female spade terminals. Used for various
connections, such as fusebox power terminals, relay connections
(sockets below) or anywhere a 1/4" female spade terminal is
required. May be used with terminal sleeves (below) for a neat
OE appearance. (500 pcs available) |
$0.12 each |
|
 |
Terminal sleeve for .250 spade terminals.
Clear/white nylon insulates and protects, while providing an OE
look. |
$0.10 each |
|
 |
Relay socket, to be used with .250 female spade
terminals. For standard 4 or 5 pin automotive relays, such as
the one pictured below. (low stock: 6 pcs left) |
$0.29 each |
|
 |
1/4" female in-line phone jack. Used for
musical instruments and other applications. |
$0.75 each |
|
 |
Kit: Amp Mate-N-Lok 6 pin male and female connectors
with terminals |
$1.50 each |
|
 |
.250 female spade terminal with male spade attached.
Great for situations where limited connections are available, such
as ground clusters or ignition coils. |
$0.17 each |
|
 |
Kit: Packard Weather-Pack 3 pin male and female
housing, with terminals and seals |
$2.50 each |
|
 |
Kit: Packard Weather-Pack 2 pin male and female
housing, with terminals and seal. Low stock - 8 available |
$2.00 each |
|
 |
Heavy duty DPDT rocker switch, 6A @ 125V, good for
general purpose applications |
$1.00 each |
|
 |
Parallel connector, non-insulated. Creates a
solid electrical and mechanical connection between two wires.
Use to connect two 18-24 gauge wires together. Cover with
shrink tubing for a weather-resistant, professional looking
connection. |
$0.04 each |
|
 |
Parallel connector, non-insulated. Larger size
for 16-14 gauge. Can also be used to join a group of wires,
such as four 20 gauge wires. |
$0.04 each |
|
 |
Butt connector, non-insulated. Longer connector
allows more wires to be crimped than a parallel connector. Use
with four 16-14 gauge or up to eight 20 gauge wires. (low stock:
10 pcs left) |
$0.04 each |
|
 |
Terminal, 1/4" ring, insulated, with built-in
strain relief crimp, accepts 22-18 gauge wire |
$0.12 each |
|
 |
Terminal, 5/16 ring, insulated, with built-in strain
relief crimp, accepts 22 to 18 gauge wire |
$0.12 each |
|
 |
8 x 50mm exhaust manifold studs. Fit Saturns,
but may also be used on watercooled VWs. Nifty E6 external
Torx head for easier install/removal. Out of stock, as of
7/22/08. Check back soon!. |
$1.50 each |
|
 |
Euro hose clamp,
16-25mm. Made by Norma, Zebra or GEM (varies), these are the
type used by the factory....get rid of those big ugly American Ideal
clamps and restore your car to its former glory. |
$0.80/each |
|
 |
Euro hose clamp,
70-90mm. Made by Norma, Zebra or GEM (varies), these are the
type used by the factory....get rid of those big ugly American Ideal
clamps and restore your car to its former glory. |
$0.80/each |
|
| |
|
|
|